When a property manager calls about a dead circuit in a rental unit, or a contractor flags a wiring issue mid-renovation, the job needs to be scoped quickly and scheduled without a lot of back-and-forth. We handle that kind of call for properties across Ontario and the surrounding Wayne County area. From a tripped breaker that won't reset to a full panel upgrade ahead of a new appliance load, the work gets assessed on the phone and priced before anyone is scheduled.
Homeowners in a town this size are often dealing with houses that haven't seen an electrician in years. Older wiring, panels that were sized for a different era, outbuildings on circuits nobody documented, and additions that were wired without a clear record of what they connect to. That's the kind of work we take on, and we handle it for Ontario properties the same way it handles it everywhere else in the region: the scope is confirmed, the price is set, and the work is done to code.
Pricing is set on the call, before the visit is scheduled. When you describe the problem or the project, we ask enough questions to give you a clear picture of what the work involves and what it costs. That conversation covers what the job includes and what would change the number if the situation on site turns out to be different from what was described.
Three things move a quote more than anything else. The first is what the fault actually turns out to be once the circuit or connection is opened up, because a symptom can point to several causes and only one of them is visible before the work starts. The second is what has to be opened up to reach it, which matters more in older construction where wiring runs aren't always where you'd expect them. The third is whether the existing panel can carry the change being asked of it, which is relevant for any new circuit, added load, or equipment hookup.
If the scope changes once the work is underway, that conversation happens before anything additional is done. You're told what was found and what addressing it involves, and you decide from there.
Not every fault that looks like a wiring problem is one. Partial power loss, a dead leg on the panel, or voltage that drops under load can all point to the service entrance rather than to anything inside the home. Part of a diagnostic visit is working out which side of the meter the problem sits on.
If the fault traces back to the utility connection, we explain what we found and what the next step is. That typically means contacting the utility directly, and we can tell you what to report and what to expect from that process. Our scope ends at the meter, but the assessment gets you to the right answer faster than calling the utility blind.
A service-entrance problem often shows up as two circuits losing power while others stay on, or as a panel that reads voltage on one leg but not the other. It can also appear as lights that dim under load in a way that points upstream rather than to a circuit fault. These symptoms overlap with panel problems, which is why the diagnostic step matters before any repair is agreed.
Where the fault sits inside the home, we handle it directly. That covers the panel, the branch circuits, the wiring to outlets and fixtures, and the service-entrance conductors between the meter and the main breaker. Grounding and bonding issues that show up during a diagnostic visit are part of that scope, not a separate job.
Panels in older homes in this area turn up in basements, utility rooms, detached garages, and occasionally in places that were never meant to be permanent. Access matters, and a visit goes faster when the panel is clear before the electrician arrives. That means moving stored items away from the door, making sure the space is lit, and knowing whether the panel is the only one on the property or whether there's a subpanel somewhere else.
For panel work specifically, knowing the current service size and whether any previous work was done on the panel helps scope the job accurately on the call. If you're not sure, that's fine. We'll work it out on site. What slows a visit down is discovering mid-job that access requires moving something substantial, or that there's a second panel nobody mentioned.
Properties in a town like Ontario often include garages, workshops, or outbuildings that were wired at different times and to different standards. Some of them have their own subpanels. Some are fed from a single circuit that was never designed to carry what's plugged into it now. When a garage or outbuilding is part of the job, let us know on the call so the visit is scoped to cover it.
Scheduling is straightforward.
Call (585) 822-6289 between 6:30 AM and 8:00 PM any day and we'll confirm what's available and get the job on the calendar.
The person who answers the phone can tell you what the visit involves.
For problems that won't keep, a burning smell near an outlet or panel, sparking from a receptacle, or a partial power loss that can't be explained by a tripped breaker, call the same number and describe what you're seeing. We'll tell you what it sounds like and what needs to happen next.
For tenanted properties, we work around occupancy. If access needs to be coordinated with a tenant or a business that has to stay open, that gets sorted on the call before the visit is confirmed. The goal is a clean handoff: the scope is agreed, access is arranged, and the work is done without the tenant or the business owner having to manage the process.
Regional winters mean multi-day outages are a real possibility, not a theoretical one. A generator that isn't wired through a proper transfer switch is a hazard to anyone working on the utility line during an outage. We handle the transfer switch, the dedicated circuit from the panel to the generator inlet, and the load management wiring that determines which circuits the generator feeds. The generator itself is the homeowner's equipment. The electrical hookup is ours.
A workshop that draws serious load needs circuits sized for it, not a shared circuit that trips the moment the compressor kicks on. We run dedicated circuits for welders, air compressors, and other high-draw equipment, sized correctly for the equipment and run back to a panel that can carry the load. If the current panel is at capacity, that's part of the conversation before the circuit is run.
An outdoor outlet that isn't weatherproofed correctly doesn't last long in this region. We install exterior outlets in weatherproof enclosures rated for the exposure, with GFCI protection and proper grounding. That covers outlets on the exterior of the house, in detached garages, and in outbuildings where the connection point is exposed to weather.
Battery-operated alarms are the minimum. Hardwired alarms with battery backup stay on when the power goes out, and interconnected units mean that when one triggers, they all trigger. We wire and install hardwired smoke and CO alarms as a standalone job or as part of a larger visit. For rental properties, this is often a code requirement that comes up during an inspection.
A Level 2 home charger needs a dedicated 240-volt circuit and a panel that has the capacity to support it. We assess the panel first, run the circuit to the garage or charging location, and install the outlet or hardwired connection the charger requires. If the panel needs an upgrade before the charger can be added, we scope both jobs together.
Older homes often lack arc-fault and ground-fault protection on the circuits that require it. AFCI breakers protect against the kind of arcing that causes electrical fires in bedroom and living space circuits. GFCI protection is required in kitchens, bathrooms, garages, and exterior locations. Adding this protection is straightforward work that makes a real difference to the safety of the system.
For landlords and property managers coordinating work across multiple units or properties, the process is the same as for any other customer. The scope is confirmed, the price is set, and the work is done to code. We can scope repairs and upgrades across multiple units in a single call and schedule them in an order that works around tenancy.
Invoicing and access arrangements are handled on the call. If the invoice needs to go to a management company rather than to the person who called, that's noted when the job is booked. For properties where a tenant is present, we coordinate access so the tenant knows what to expect and the work doesn't require the landlord to be on site.
After the work is done, you have a record of what was found, what was done, and what the system looks like now. That matters when a property goes through inspection or changes hands, and it's useful background if the same property needs work again later. Details on each of these are on our full list of electrical services.
Ontario sits in Wayne County, and we take calls from across the surrounding area. That includes Williamson, Walworth, Pultneyville, Marion, and Gananda, as well as other communities nearby.
If you're in the area and not sure whether your address falls within our current coverage, call (585) 822-6289 and we'll confirm it on the call.
No pressure and no gimmicks, just safe, solid wiring wherever the job takes us in this part of the county.
Houses in a town this size often carry wiring that reflects several decades of additions and repairs, not all of them documented. Knob-and-tube wiring, aluminum branch circuits, and panels that were last updated well before current code requirements are common findings. None of that changes whether we can do the work, but it does affect how the job is scoped, and describing the age and history of the property on the call helps us give you an accurate picture before the visit.
The process starts with a single call to scope the work across however many units are involved. Access arrangements, scheduling around tenancy, and invoicing to the management company rather than to individual tenants are all handled at the booking stage. After the work is done, you have a record of what was found and completed at each unit, which is useful for inspections and future reference.
An inspection report that identifies a deficiency means the issue was found and documented, but it does not mean the repair is automatically included in the inspection scope. We explain what each identified item involves and what addressing it costs before any remedial work is scheduled. You decide what to prioritize and in what order.
Yes. Heat tape requires a dedicated circuit run to the appropriate location, a weatherproof connection, and a GFCI-protected outlet rated for the application. The tape or cable itself is the homeowner's or contractor's item. We handle the circuit and the wiring so the system runs reliably through the coldest months. If you're scheduling this ahead of the season, call early because demand for this work picks up quickly once temperatures drop.
The first step is a conversation about the symptom and a visual assessment of the panel and the area where the fault is occurring. We confirm what was described on the call, identify any immediate safety concerns, and agree on the scope of work before anything starts. The price is set before the work begins, so you know what you are agreeing to.
We identify it, explain what it involves, and give you the options. Not all older wiring requires immediate replacement, but some conditions, like active knob-and-tube in insulated spaces or aluminum branch-circuit wiring with connection issues, do need to be addressed. We tell you what we found and what the remediation involves before any work is agreed.
A loose outlet, a switch that buzzes, a circuit that trips under a load it used to handle without complaint. None of those are too small to call about, and any of them can be the first sign of something that gets worse if it's left.
Call (585) 822-6289 between 6:30 AM and 8:00 PM any day.
Describe what you're seeing, get a price, and get it on the calendar. Call in the morning. Talk it through. Know the options by the end of the call.
We are also in: Williamson, Walworth, Gananda.
From a tripped breaker to a full panel upgrade, we handle the electrical work that keeps Ontario homes and businesses running safely. Every job starts with a clear scope and a confirmed price before anything is scheduled. The table below covers what each service includes, who it fits, and what is practical to know before you call.
| Service Type | Scope of Work | When You Need It | Worth Knowing |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp service upgrades, Subpanel installation, Load calculations, Whole-home surge protection at the panel | Homes adding an EV charger, electric range, or large new load that the current service cannot support | Panel work is finished to code and is the right time to add whole-home surge protection while the panel is already open. |
| Backup Generator Installation | Transfer switch installation, Dedicated circuit from panel to generator inlet, Standby and portable hookup configurations, Backfeed prevention wiring | Ontario homeowners preparing for multi-day winter outages from lake-effect storms | Our scope is the wiring and the transfer switch. The generator itself comes from the homeowner or a separate supplier. |
| Electrical Safety Inspections | Full system assessment, Wiring condition review, Panel capacity evaluation, Code violation identification | Landlords, property managers, and buyers or sellers of older Wayne County homes | An inspection gives a clear picture of what the system can handle and what needs attention before it becomes a problem at a tenant's call or a home sale. |
Call (585) 822-6289 and we will walk through what your job involves, confirm the scope, and set the price before anything is scheduled.
(585) 822-6289