Irondequoit Electrical Company handles residential and commercial electrical work across Irondequoit and the wider Monroe County area. One call covers the full range: repairs and troubleshooting, breaker panel work, wiring and rewiring, outlet and lighting installation, EV charger hookups, generator connections, and electrical safety inspections. We power your home. We protect your circuits. We earn the call.
Every job gets treated like it matters, because it does. That means no pressure and no gimmicks, just safe, solid wiring and a clear explanation of what the work involves before anything is scheduled. Whether you are a homeowner dealing with a dead outlet or a property manager coordinating electrical work across a commercial building, the process is the same: call, get a price, get it on the calendar.
No matter what's going wrong with your wiring, the first step is figuring out exactly where the problem is. A dead outlet, flickering lights, a breaker that trips every time you run the microwave, a burning smell near a panel or outlet, a sparking receptacle, or half the house going dark without warning: each of those symptoms points somewhere specific, and tracing it is what a troubleshooting visit is for.
When the call comes in, we ask about the symptom, the location, and what was happening when the problem started. That gives us a working picture before anyone arrives. On site, the electrician works through the circuit systematically: checking the panel, testing the affected outlets and switches, inspecting wiring connections, and confirming whether the issue is isolated or points to something deeper in the system. GFCI and AFCI protection gets checked where it applies. Grounding and bonding get verified. Arc-fault and ground-fault breakers are tested when the circuit calls for it.
Commercial properties get the same methodical approach. A tripped breaker in a retail space or a dead circuit in an office building gets traced the same way a residential fault does, with the scope of the work confirmed before anything is touched. One call gets the problem looked at properly.
This area has every kind of panel and circuit in it, from mid-century fuse boxes to modern 200-amp service entrances. That range matters, because the right approach to a panel repair or upgrade depends entirely on what is already there and what the property needs to carry.
We handle panel repairs, full panel replacements, main electrical panel replacements, subpanel installation, and service entrance and meter upgrades. A 200-amp service upgrade is one of the most common requests we get, and for good reason: older panels were not sized for the load that modern homes put on them. Air conditioning units, electric ranges, EV chargers, and home office equipment all draw current, and a panel that was adequate twenty years ago may not be adequate now.
Before any panel work is quoted, we run load calculations to confirm what the new service needs to carry. That covers the existing circuits, any planned additions, and the capacity needed for dedicated circuits or EV charger wiring. Panel and wiring work finished to code is the baseline, not an upgrade. We'll handle the wiring so you don't have to.
Before a small wiring issue turns into a hazard, it is worth knowing what the wiring in the walls actually is. Irondequoit has a significant stock of older housing, and older homes often have wiring that was installed to a different standard than what is current. Knob-and-tube wiring, aluminum wiring from the 1960s and 70s, and partial rewires that left older conductors in place are all common findings in this area.
Whole-home rewiring replaces the full circuit network from the panel out. Partial rewires address specific sections: a kitchen that was never updated, a basement circuit running on old wire, or a room addition that was wired in a way that no longer meets code. Knob-and-tube replacement and aluminum-wiring remediation are handled as dedicated projects, with the scope mapped out before work begins.
Outlet and switch work covers the full range:
Dedicated appliance circuits are a separate category. A dryer, electric range, refrigerator, or large appliance that draws significant current needs its own circuit sized for that load. We run those circuits from the panel, confirm the breaker is rated correctly, and make sure the outlet matches what the appliance requires. The scope of the electrical work priced before it starts means you know what the dedicated circuit job covers before we schedule it. Call now and we'll get the power back where it belongs.
When the electrician arrives, the real work begins, and lighting installation covers more ground than most people expect. Recessed lighting means cutting into ceilings, running new wire, and connecting fixtures to a switch leg that is either already there or needs to be added. LED retrofit work involves swapping out older fixtures and confirming the existing wiring is rated for the new load. Under-cabinet lighting requires a circuit run to a location that usually has no outlet nearby.
Ceiling fan installation is straightforward when a ceiling box is already rated for a fan. When it is not, the box gets replaced before the fan goes up. Wiring a fan with a separate light and fan control means either running a three-wire cable or installing a wireless control module, and we confirm which approach makes sense for the existing switch box before the job is quoted.
Exterior electrical work includes:
All exterior work gets weatherproof covers and fittings rated for outdoor exposure. Call now and we'll set the appointment.
A Level 2 EV charger runs on a 240-volt dedicated circuit sized for the charger's amperage rating, typically 40 to 50 amps for home use. Before the charger is installed, we check panel capacity to confirm there is room for the new circuit without overloading the existing service. If the panel needs an upgrade to accommodate the load, that gets quoted as part of the same project. EV charger wiring runs from the panel to the garage or parking area, and the circuit is confirmed before the charger is connected.
A whole-home surge protector installs at the panel and intercepts voltage spikes before they reach the circuits. A direct lightning strike or a utility surge can damage electronics, appliances, and HVAC equipment in a fraction of a second, and a panel-level device covers the entire home rather than relying on individual power strips. We install the unit at the main panel, confirm the connections, and test it before leaving.
Western New York winters bring ice storms, heavy snow, and power outages that can last days. A backup generator is a practical piece of equipment in this area, and the electrical connection is what makes it usable safely. We install transfer switches for standby generators and handle portable generator hookup wiring, including interlock kits that prevent back-feeding the utility line. The transfer switch is wired to the panel, the generator inlet is installed at the exterior, and the circuit is tested before the job is closed out. The work area left as it was found is a standard part of how we close every job.
Irondequoit's housing stock is a mix of post-war construction and mid-century builds, with a meaningful number of homes that have not had their electrical systems updated since they were built. That pattern shapes what we find on a typical job here.
Fuse boxes are still present in some of the older properties, particularly in the neighborhoods closest to the bay. Two-wire circuits without a ground conductor are common in homes built before grounding became standard. Knob-and-tube wiring, where it survives, is often found in attic and basement runs that were never touched during renovations. Aluminum branch-circuit wiring appears in homes built in the late 1960s and early 1970s, and it requires specific connection methods to reduce the risk of loose terminations.
None of that is unusual, and none of it is a problem that cannot be addressed. Knowing what is common in this area means the troubleshooting visit starts with the right questions, and the quote reflects what the job actually involves rather than a generic estimate that changes on site.
Scheduling a service call is simple, and an electrical safety inspection follows the same process as any other job: call, describe the property and the reason for the inspection, get a price, and set a date. The inspection itself covers the panel, the branch circuits, the outlets and switches, the grounding system, and the visible wiring in accessible areas.
Inspections are worth scheduling when a home is older and has not had an electrical review in some time, before purchasing a property in Monroe County, after storm damage that may have affected the service entrance or exterior wiring, or when a renovation is planned and the existing wiring needs to be assessed before new circuits are added. Troubleshooting and diagnostics are part of every inspection: if something is found that needs attention, the scope and cost of addressing it are explained before any additional work is agreed.
Electrical work gets quoted on the call. Before anything is scheduled, you get a price and an explanation of what it covers. That applies to straightforward jobs like outlet installation and ceiling fan wiring, and it applies to larger projects like panel replacements, whole-home rewiring, and EV charger circuits.
Common questions we hear:
Each of those has a real answer that depends on the specifics of the property, the panel, and the scope of the work. The electrician quote you get on the call reflects those specifics, not a generic range pulled from a website. Ask what the estimate covers and you get a straight answer.
We serve Irondequoit as the primary base of operations, and we cover the surrounding Monroe County communities for both residential and commercial electrical work. That includes:
Whether you need a residential electrician for a single-family home, a commercial electrician for a retail or office space, or an electrical contractor for a larger project, the same process applies. Call, describe the job, get a price, and get it scheduled.
We work with single-family homeowners, multi-unit landlords, property managers, and small commercial clients including retail spaces, office buildings, and businesses undergoing renovation or build-out. The electrical needs vary, but the process is the same across all of them: scope the job, set the price, and complete the work to code.
Yes. Irondequoit's housing stock includes a significant number of post-war and mid-century homes, and we regularly encounter knob-and-tube wiring, aluminum branch-circuit wiring from the 1960s and 1970s, and ungrounded two-wire systems. Knowing what is common in this area means the troubleshooting visit starts with the right questions and the quote reflects what the job actually involves.
We serve Irondequoit as the primary service area and cover surrounding Monroe County communities including Rochester, Webster, Penfield, Brighton, Greece, Henrietta, and East Rochester.
If you are in a nearby town and are not sure whether your address falls within the current service area, call (585) 822-6289 and we will confirm.
Before any work starts, the scope and price are confirmed. If something unexpected comes up once the electrician is on site, that conversation happens before the work continues. You are not handed a completed job and a bill that does not match what was discussed.
Clear access to the panel, the work areas, and any circuits involved is the biggest factor. When we know what to expect before arriving, the visit goes efficiently and the scope stays accurate. Describing the symptom or the project in detail when you call helps us show up prepared.
A small job like an outlet replacement or a ceiling fan swap is typically scoped and completed in a single visit. A larger project like a panel upgrade, whole-home rewiring, or a service entrance replacement may involve a pre-visit assessment, load calculations, and coordination with the utility. Either way, the price is confirmed before work begins and the scope is explained before anyone commits.
Irondequoit Electrical Company is available every day from 6:30 AM to 8:00 PM. One call is all it takes to get a price on the work and find out what is available on the schedule. Call in the morning. Talk it through. Know the options by the end of the call.
Call (585) 822-6289 to get a quote on your electrical project, whether it is a repair, a panel upgrade, an EV charger circuit, or anything else on the list. We'll handle the wiring so you don't have to.
(585) 822-6289